How to access speakers in a 2007 Chevrolet Silverado 1500 Classic, extended cab?

I know in some Chevrolet vehicles you can just pop off the speaker grill and your all set. But for this truck do you have to take off the entire door panel or just the grills?|||the front doors have to be removed. there are a couple of 7mm screws, one around the bottom right i think, one around the handle that you pull to close the door and you have to remove the door lock indicator that slides back and forth and one screw behind that. i think there are 3, i could be wrong though. there is a torx screw underneath a little cap that pops off, the trim around the door handle has to come off and the triangle trim in the top corner has to come off. the door will lift up then you can unplug the window controls. if its just the extended cab, for the back doors there is one 7mm and the trim around the handle pops off then door is held on with pressure clips. good luck! fairly easy to do, the hardest part will be to get the plug out of the window controls. its hard to explain how it comes off on here. you will have to push a small clip in the middle of it then the other thing will slide over it releasing the plug. like i said, hard to explain it on here how the plug comes out but once you see it you will probably understand. let me know if you need more help.|||www.the12volt.com





Ask there|||if u are changing the front speakers u need to remove the door panels completely. make sure when u do u have spare door panel clip, cause they usually break when the door panel is removed...as for the rear speakers..the whole rear interior panel have to be removed, that means the rear seat also has to come out...